Jaxon Mining Inc.
Jaxon Mining Inc.
- ISIN: CA47200C1023
- Land: .
Nachricht vom 10.11.2017 | 00:38
Jaxon Drill Tests High Chargeability Anomalies at Hazelton
DGAP-News: Jaxon Mining Inc. / Key word(s): Miscellaneous
Vancouver, British Columbia--(Newsfile Corp. - November 9, 2017) - Jaxon Mining Inc. (TSXV: JAX) (FSE: OU31) is pleased to provide the following update from its Fall/Winter 2017 drill program at the Company's Max silver-zinc target area at the Hazelton Project in the Skeena Arch, British Columbia.
Jaxon Mining has completed the second and third drill holes, JAX 17-02 and JAX 17-03, for a length of 201m and 150m respectively. Both holes were drilled from the same pad location, approximately 270m north of drill hole JAX 17-01. These first three holes test chargeability targets (the Hamlin IP target zone) from the Volterra 2D induced polarization (IP) inversion below the survey line 4000E. The associated 2D inversion cross-section model depicts flat lying high-chargeability features with thickness of 50m and individual strike length of greater than 200m. This IP target is in close proximity to outcropping sulphide exposures previously channel sampled at the 550 Zone and rich in zinc and silver bearing sulphosalts (See JAX News Release Aug 9, 2017), as well as airborne geophysical VTEM conductive zone targets.
Jaxon is moving the drill to a third location about 500m further west of the Hamlin IP target zone and upslope approximately 200 vertical metres to a location near the sulphide exposures trenched and channel sampled at the 724 zone (See JAX News Release Aug 9, 2017). At this location the sulphide exposures are also rich in zinc and silver bearing sulphosalts and are closely associated with iron pyrite which Jaxon interprets as being highly chargeable in the 3D Volterra detailed IP survey.
At surface the area is characterized by a red-brown gossanous colouration in the bedrock exposed in a rockslide on the north side of a creek gully. A strong 3D IP chargeability anomaly is developed at surface, co-incident with the mineralised outcrops, and is well developed at depth for a strike length of over 200m with a co-incident low resistivity anomaly. The geophysical anomaly and mineralised exposures are also coincident with very anomalous antimony-silver-zinc soil geochemistry. This zone is known as the 700 North Zone IP Anomaly. Drill hole JAX 17-09 will commence today and will be drilled at an 80 degree dip to an estimated depth of 120m.
All drill core in wooden sample boxes are removed by Jaxon staff from the drill sites daily and transported to Jaxon's secured drill core logging and core cutting facility in Smithers, British Columbia. After completion of the drill core saw cutting and QA-QC preparation for each hole, the batch of samples are sent by secure transport to the sample preparation laboratory and analytical facilities in Langley, British Columbia. The Company expects the first batch of drill core samples to be shipped at or around November 12th.
This news release has been reviewed and approved by Derrick Strickland, P.Geo. a qualified person for the purpose of National Instrument 43-101, standards and disclosure for mineral projects.
ON BEHALF OF THE BOARD OF DIRECTORS
'Jason Cubitt' ______
For further information regarding Jaxon Mining Inc., please contact Mark Carruthers at 604-608-0400
This news release may contain forward-looking information, which is not comprised of historical facts. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking information. Forward-looking information in this news release may include, but is not limited to, the Company's objectives, goals or future plans. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, those risks set out in the Company's public documents filed on SEDAR. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames, or at all. The Company disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as required by law. Neither TSX Venture exchange nor its Regulations Services Provider (as that term is defined in the policies of the TSX Venture Exchange accepts responsibility for the adequacy or accuracy of this release
Click on, or paste the following link into your web browser, to view the associated documents http://www.newsfilecorp.com/release/30397
|Company:||Jaxon Mining Inc.|
|End of News||DGAP News Service|
GBC im Fokus
M1 Kliniken: Geschäftsjahr über den Erwartungen
Mit dem deutlichen Anstieg auf 21 Klinikstandorte (Ende 2016: 13) hat die auf ästhetische Medizin spezialisierte M1 Kliniken AG die Basis für einen Ausbau der Umsatz- und Ertragsbasis gelegt. Hinzu kommt die bereits in Umsetzung befindliche Erschließung weiterer Umsatzströme, wie etwa die Erweiterung der Eigenmarken oder die Abdeckung der ästhetischen Zahnmedizin. Das Kursziel beläuft sich auf 18,50 € und das Rating lautet KAUFEN.
Der AKTIONÄR News
22. Mai 14:24 ThyssenKrupp: Aktie hebt ab – jetzt greift Singer ein
18. Mai 2018
Original-Research: Valneva SE (von First Berlin Equity Research GmbH): BUY Valneva SE
22. Mai 2018